
HIK-106
4 Port AI Poe Switch
Port 6KV lightning protection
- The full port supports 6KV lightning protection, supports power supply over-temperature protection, over-voltage protection, inrush current protection and other protection features.
Swap features
- Non-blocking switching architecture, all ports support wire-speed forwarding.
- Provides two 10/100M RJ45 uplink ports at the same time.
- Supports IEEE 802.3x full-duplex and half-duplex backpressure flow.
- Supports uplink port auto-rollover (Auto MDI/MDIX).
AI smart buttons
- AI Extend: 1-4 ports support 250 meters of long-distance power supply (it is recommended to use super five categories to connect the Internet line);
- AI VLAN: Isolate 1-4 ports from each other, which can effectively suppress network storms and improve network performance;
- AI QoS: Prioritize the processing of identified video data to make video transmission smoother;
- AI PoE: Automatically detects the powered port, finds the dead device, and restarts the device without power;
PoE features
- Complies with IEEE802.3af/at/bt standards, with a maximum PoE power of 90W per port.
- Support PoE short circuit protection, overcurrent protection, over temperature protection, etc.
- Support AI PoE, restart dead devices.
Ease of use
- Plug to use, no configuration required, easy to use.
- Zero configuration feature, the power supply is automatically supplied to the adaptive device
Tag: Networking, Switch
DATA SHEETPESAN SEKARANG
| Specification | |
|---|---|
| Network Interface |
• 4x 10/100Mbps PoE-enabled RJ45 ports (ports 1 to 4) • 2 x 10/100Mbps non-PoE function RJ45 ports (ports 5 ~ 6) |
| Network Protocol Standards |
• IEEE802.3iN IEEE 802.3uv IEEE802.3x, IEEE 802.3af • IEEE 802.3at |
| Performance Specifications |
• Backplane bandwidth: 1.2Gbps (non-blocking) • Packet forwarding rate: 0.89Mpps • MAC address table: 2K • Forwarding mode: Store-and-forward |
| LED Indicator |
• Power LED • LINK/ACT indicator • PoE indicator • RESV: Reserved |
| PoE Bits | 1/2(+), 3/6(-) |
| Power Support |
• Single port maximum output power: 30W • The maximum power supply of the whole machine: 60W |
| Dimension | Size (length x width x height): 125mm x 75mm x 27mm |
| Environmental Specifications |
• Working temperature: 0°C ~ 40°C • Storage temperature: -40°C ~ 70°C • Working humidity: 10% ~ 90% RH does not condense • Storage humidity: 5% ~ 90% RH non-condensing |
| Safety Specifications | CE / ROHS / FCC / CCC |


